BG-FLEX sigma tec Channel Drain

The BG-FLEX sigma channel drains are made of stainless steel and are used to drain water from the coated floors into a stormwater collection facility.
BG-FLEX sigma tec, the channel drain system for commercial buildings, is made of stainless steel 1.4301 or better. They are the perfect solution for draining surface water from coated concrete surfaces. To permanently protect the building structure, a sealed connection can be established between the flooring and the channel system. Stainless steel and plastic covers from the BG-FILCOTEN range can be selected up to load class C 250, depending on the nominal width.

Technical data

Load class C 250
Channel material stainless steel 1.4301
Length 500 - 2,000 mm
19.7 - 78.8 "
Width 190 mm
7.5 "
Height at channel end 72 mm
2.9 "

Application areas: parking deck parking garage multi-storey car park underground car park garage

Picture Load class (kN) Features Inlet cross-section (cm²/m) Kg Item no.
COMBee grate
B 125
L: 500 mm x B: 123 mm x H: 20 mm
L: 19.7 " x B: 4.9 " x H: 0.8 "
diameter: 7.3
Material: Plastic
Seal: fiX-locking, no locking device
290 cm²/m 0.9 kg
2 Lb
17010401
C 250
L: 500 mm x B: 123 mm x H: 20 mm
L: 19.7 " x B: 4.9 " x H: 0.8 "
diameter: 7.3
Material: Plastic
Seal: fiX-locking, no locking device
290 cm²/m 1.1 kg
2.5 Lb
17010402
plastic grating slotted
B 125
L: 500 mm x B: 123 mm x H: 20 mm
L: 19.7 " x B: 4.9 " x H: 0.8 "
Schitzweite: 8/40
Material: Plastic
Seal: fiX-locking, no locking device
420 cm²/m 0.9 kg
2 Lb
17010403
C 250
L: 500 mm x B: 123 mm x H: 20 mm
L: 19.7 " x B: 4.9 " x H: 0.8 "
Schitzweite: 8/40
Material: Plastic
Seal: fiX-locking, no locking device
420 cm²/m 1.2 kg
2.6 Lb
17010404
Mesh grating
B 125
L: 398 mm x H: 30 mm
L: 15.7 " x H: 1.2 "
Mesh width: 30/10
Material: stainless steel 1.4301
10 kg
22 Lb
20700301
C 250
L: 398 mm x H: 60 mm
L: 15.7 " x H: 2.4 "
Mesh width: 30/10
Material: stainless steel 1.4301
11.8 kg
25.9 Lb
20700302
C 250
L: 1,000 mm x B: 122 mm x H: 20 mm
L: 39.4 " x B: 4.8 " x H: 0.8 "
Mesh width: 30/10
Material: stainless steel 1.4301
Seal: fiX-locking
910 cm²/m 3.3 kg
7.3 Lb
17010322
Features Kg Item no.
universally
BG-FLEX sigma tec, front cap NW 100, incl. gasket, bolts and nuts
Consisting of: 1 pce. 20710315 sigma tec front plate, 1 pce. 20710316 sigma tec gasket, 6 pcs. 20700310 stainless steel bolt M8x20, 6 pcs. stainless steel nut M8
Material: stainless steel 1.4301
0.6 kg
1.3 Lb
20710317
BG-FLEX sigma tec, SET, pump sump frame as end piece 400/400
consisting of:
1 pce. 20710311 pump sump end piece
4 pcs. 20700312 levelling foot
1 pcs. 20710316 gasket
6 pcs. 20700310 bolt M8x20
6 pcs. 20700311 nut M8
Material: stainless steel 1.4301
4 kg
8.9 Lb
20710371
BG-FLEX sigma tec, SET, pump sump as a connection piece straight
consisting of:
1 pce. 20710312 pump sump connection piece
4 pcs. 20700312 levelling foot
2 pcs. 20710316 gasket
12 pcs. 20700310 bolt M8x20
12 pcs. 20700311 nut M8
Material: stainless steel 1.4301
4.1 kg
8.9 Lb
20710372
BG-FLEX sigma tec pump sump 90° corner 400/400
consisting of:
1 pce. 20710318 pump sump corner-piece
4 pcs. 20700312 levelling foot
2 pcs. 20710316 gasket
12 pcs. 20700310 bolt M8x20
12 pcs. 20700311 nut M8
Material: stainless steel 1.4301
4.1 kg
8.9 Lb
20710373
BG-FLEX sigma tec, SET, pump sump as a T-piece 400/400
consisting of:
1 pce. 20710313 pump sump T-piece
4 pcs. 20700312 levelling foot
3 pcs. 20710316 gasket
18 pcs. 20700310 bolt M8x20
18 pcs. 20700311 nut M8
Material: stainless steel 1.4301
4 kg
8.9 Lb
20710374
BG-FLEX sigma tec, SET, pump sump as a cross piece 400/400
consisting of:
1 pce. 20710314 pump sump X-piece
4 pcs. 20700312 levelling foot
4 pcs. 20710316 gasket
24 pcs. 20700310 bolt M8x20
24 pcs. 20700311 nut M8
Material: stainless steel 1.4301
4 kg
8.9 Lb
20710375
Download category

Brochures




Square, practical, sealed.

Front cap

  • For a clean finish to the channel run
  • Incl. surface strip
  • With bolted seal
+

Cover

  • Mesh grating made of stainless steel 1.4301 (V2A)
  • MW 30/10 or 30/30
  • Load class B 125 or C 250
  • Bolting possible (ordered separately)
+

Outlet units

  • Outlet pipes with selectable diameter
  • Individual placement in the channel run
  • Outlet as feed line e.g. to the oil separator
+

Mounting system

  • Height-adjustable mounting system as a complete kit
+

Channel body

  • made of stainless steel 1.4301 or better
  • Nominal width: 150 mm visible width: 208 mm
  • Element length: 4000 mm (adaptable to the length of the run)
  • Material thickness: 1.5 mm
+

Sump pit frame

  • As connecting element
  • Also for T, corner and cross connections
  • As a frame for a collection basin/sump pit manufactured on site
+

Anchor tab

  • To permanently mount the channel body in the adjoining floor structure
+

Perforated surface strip

  • To permanently connect the flooring to the perforated strip plate
+

Waterproof connection

  • Bolted flange
  • NBR seal
  • Complete with stainless steel M6 bolting
+

COMBee design grating

  • Made of polyamide PA6, corrosion-free and UV-resistant
  • Up to load class C250
  • fiX locking system, protection against longitudinal movement
  • Non-slip honeycomb profile
+

Send us your project!

Our technical support would be pleased to advise you and prepare a complete project quotation.

 

Robert Eder:

Tel.: +43 (6233) 89 00-286

Email: tech.support@bg.graspointner.com