BG-FLEX sigma tec
BG-FLEX sigma tec, the drainage system for commercial buildings, is made of stainless steel 1.4301 or better. They are the perfect solution for draining surface water from coated concrete surfaces. To permanently protect the building structure, a sealed connection can be established between the flooring and the channel system. Stainless steel and plastic covers from the BG-FILCOTEN range can be selected up to load class C250, depending on the nominal width.
Technical data
Load class
C 250
Channel material
stainless steel 1.4301
Length
500 - 2,000 mm
19.7 - 78.8 "
Width
190 mm
7.5 "
Height at channel end
72 mm
2.9 "
Application areas: parking deck parking garage multi-storey car park underground car park garage
Picture | Load class (kN) | Features | Inlet cross-section (cm²/m) | Weight | Item no. |
---|---|---|---|---|---|
COMBee grate | |||||
B 125
| 290 cm²/m |
0.9 kg
2 lb | 17010401 | ||
C 250
| 290 cm²/m |
1.1 kg
2.5 lb | 17010402 | ||
plastic grating slotted | |||||
B 125
| 420 cm²/m |
0.9 kg
2 lb | 17010403 | ||
C 250
| 420 cm²/m |
1.2 kg
2.6 lb | 17010404 | ||
Mesh grating | |||||
B 125
| L: 398 mm x H: 30 mm L: 15.7 " x H: 1.2 " Mesh width: 30/10 Material: stainless steel 1.4301 |
10 kg
22 lb | 20700301 | ||
C 250
| L: 398 mm x H: 60 mm L: 15.7 " x H: 2.4 " Mesh width: 30/10 Material: stainless steel 1.4301 |
11.8 kg
25.9 lb | 20700302 | ||
C 250
| 910 cm²/m |
3.3 kg
7.3 lb | 17010322 |
Features | Weight | Item no. | ||
---|---|---|---|---|
universally | ||||
BG-FLEX sigma tec, front cap NW 100, incl. gasket, bolts and nuts Consisting of: 1 pce. 20710315 sigma tec front plate, 1 pce. 20710316 sigma tec gasket, 6 pcs. 20700310 stainless steel bolt M8x20, 6 pcs. stainless steel nut M8 Material: stainless steel 1.4301 |
0.6 kg
1.3 lb | 20710317 | ||
BG-FLEX sigma tec, SET, pump sump frame as end piece 400/400 consisting of: 1 pce. 20710311 pump sump end piece 4 pcs. 20700312 levelling foot 1 pcs. 20710316 gasket 6 pcs. 20700310 bolt M8x20 6 pcs. 20700311 nut M8 Material: stainless steel 1.4301 |
4 kg
8.9 lb | 20710371 | ||
BG-FLEX sigma tec, SET, pump sump as a connection piece straight consisting of: 1 pce. 20710312 pump sump connection piece 4 pcs. 20700312 levelling foot 2 pcs. 20710316 gasket 12 pcs. 20700310 bolt M8x20 12 pcs. 20700311 nut M8 Material: stainless steel 1.4301 |
4.1 kg
8.9 lb | 20710372 | ||
BG-FLEX sigma tec pump sump 90° corner 400/400 consisting of: 1 pce. 20710318 pump sump corner-piece 4 pcs. 20700312 levelling foot 2 pcs. 20710316 gasket 12 pcs. 20700310 bolt M8x20 12 pcs. 20700311 nut M8 Material: stainless steel 1.4301 |
4.1 kg
8.9 lb | 20710373 | ||
BG-FLEX sigma tec, SET, pump sump as a T-piece 400/400 consisting of: 1 pce. 20710313 pump sump T-piece 4 pcs. 20700312 levelling foot 3 pcs. 20710316 gasket 18 pcs. 20700310 bolt M8x20 18 pcs. 20700311 nut M8 Material: stainless steel 1.4301 |
4 kg
8.9 lb | 20710374 | ||
BG-FLEX sigma tec, SET, pump sump as a cross piece 400/400 consisting of: 1 pce. 20710314 pump sump X-piece 4 pcs. 20700312 levelling foot 4 pcs. 20710316 gasket 24 pcs. 20700310 bolt M8x20 24 pcs. 20700311 nut M8 Material: stainless steel 1.4301 |
4 kg
8.9 lb | 20710375 |
Download category
brochure
installation detail | |
---|---|
BG-FLEX sigma tec | |
Einbaudetail-BG-FLEX-sigma-tec.pdf |
data sheet | |
---|---|
BG-FLEX sigma tec | |
sigma-tec-NW100-data-sheet.pdf | |
sigma-tec-NW100-data-sheet.dwg | DWG |
product drawing | |
---|---|
BG-FLEX sigma tec | |
20710351-Schnitt-BG-FLEX-sigma-tec.png | PNG |
BIM (Building Information Modeling) | |
---|---|
1-BIM-REVIT.zip | ZIP |
2-BIM-open-source.zip | ZIP |
Square, practical, sealed.
Square, practical, sealed.
Front cap
- For a clean finish to the channel run
- Incl. surface strip
- With bolted seal
+
Cover
- Mesh grating made of stainless steel 1.4301 (V2A)
- MW 30/10
- Load class B125 or C250
- Bolting possible (ordered separately)
+
Outlet units
- Outlet pipes with selectable diameter
- Individual placement in the channel run
- Outlet as feed line e.g. to the oil separator
+
Mounting system
- Height-adjustable mounting system as a complete kit
+
Channel body
- made of stainless steel 1.4301 or better
- Nominal width: 150 mm visible width: 208 mm
- Element length: 4000 mm (adaptable to the length of the run)
- Material thickness: 1,5 mm
+
Sump pit frame
- As connecting element
- Also for T, corner and cross connections
- As a frame for a collection basin/sump pit manufactured on site
+
Anchor tab
- To permanently mount the channel body in the adjoining floor structure
+
Perforated surface strip
- To permanently connect the flooring to the perforated strip plate
+
Waterproof connection
- Bolted flange
- NBR seal
- Complete with stainless steel M6 bolting
+
COMBee design grating
- Made of polyamide PA6, corrosion-free and UV-resistant
- Up to load class C250
- fiX locking system, protection against longitudinal movement
- Non-slip honeycomb profile
+
Any
questions?