BG-RAIL cable trough inlaying
The BG-RAIL sunk cable trough is used in railway stations and along railway lines to supply all electrical installations, signal and energy supply as well as telecommunication cables. The solid cover also acts as a path. All cable troughs are manufactured with “premarked” 5 mm cutting lines. These allow a precise mitre cut of 22,5° or 15° to be created on site in seconds. This makes installation in different radii possible and allows obstacles to be “bypassed”.
Technical data
Channel material
concrete
Length
1,000 mm
39.4 "
Width
410 - 860 mm
16.2 - 33.9 "
Height at channel end
290 mm
11.5 "
Application areas: Rail station platform railway route cable shaft cable route Cable trough
| Picture | Sizes | Length | Width | Height: | Weight | Item no. | ||
|---|---|---|---|---|---|---|---|---|
| 1,000 mm | ||||||||
| size 1 |
1,000 mm
39.4 " |
410 mm
16.2 " |
290 mm
11.5 " |
137 kg
302.1 lb | 41006 | |||
| size 2 |
1,000 mm
39.4 " |
510 mm
20.1 " |
290 mm
11.5 " |
153 kg
337.4 lb | 41007 | |||
| size 3 |
1,000 mm
39.4 " |
610 mm
24.1 " |
290 mm
11.5 " |
179 kg
394.7 lb | 41008 | ||
| size 4 |
1,000 mm
39.4 " |
740 mm
29.2 " |
290 mm
11.5 " |
188 kg
414.5 lb | 41009 | |||
| size 5 |
1,000 mm
39.4 " |
860 mm
33.9 " |
290 mm
11.5 " |
210 kg
463 lb | 41010 | |||
| Features | Weight | Item no. | ||
|---|---|---|---|---|
| separator slab | ||||
 | BG-RAIL, separating slab, 495/150 Material: concrete |
6 kg
13.3 lb | 41024 | |
| trench belt | ||||
BG-RAIL, trough cord TB12, PP, hollow fibre woven, 100m per coil, for cable trough covers acc. to ÖBB TK135R559, palette out of 50 coils = 5000m/palette Material: PP |
0.1 kg
0.2 lb | 41183 | ||
| lifting grab | ||||
 | lifting grab channels and cable troughs, max. load 250 kg |
18 kg
39.7 lb | 80018 | |
 | lifting grab channels and cable troughs, max. load 600 kg max. load: 600 kg opening width: 50 - 600 mm, grabs from the outside; Pay attention to the attached safety instructions! |
29 kg
64 lb | 80019 | |
Download category
Any
questions?