BG-RAIL cable trough onlaying
The BG-RAIL overlay cable trough is used in railway stations and along railway lines to supply all electrical installations, such as the signal and energy supply as well as telecommunication cables. The solid cover can also be used as a path. The cable trough is produced with “premarked” 5 mm cutting lines. These allow a precise mitre cut of 22,5° or 15° to be created on site in seconds. This makes installation in different radii possible and allows practically every obstacle to be bypassed.
Technical data
Channel material
concrete
Length
1,000 mm
Width
170 - 700 mm
Height at channel end
140 mm, 175 mm, 215 mm
Application areas: Rail station platform railway route cable shaft cable route Cable trough
| Picture | Sizes | Length | Width | Height: | Weight | Item no. | ||
|---|---|---|---|---|---|---|---|---|
| 1,000 mm | ||||||||
| size 1 | 1,000 mm | 280 mm | 215 mm | 72 kg | 41001 | |||
| size 2 | 1,000 mm | 380 mm | 215 mm | 84 kg | 41002 | |||
| size 3 | 1,000 mm | 480 mm | 215 mm | 97 kg | 41003 | ||
| size 4 | 1,000 mm | 600 mm | 215 mm | 116 kg | 41004 | |||
| size 5 | 1,000 mm | 700 mm | 215 mm | 134 kg | 41005 | |||
| TK 1 | 1,000 mm | 170 mm | 140 mm | 29 kg | 41035 | |||
| TK 2 | 1,000 mm | 213 mm | 175 mm | 38 kg | 41040 | |||
| Features | Weight | Item no. | ||
|---|---|---|---|---|
| separator slab | ||||
 | BG-RAIL, separating slab, 495/150 Material: concrete | 6 kg | 41024 | |
| trench belt | ||||
BG-RAIL, trough cord TB12, PP, hollow fibre woven, 100m per coil, for cable trough covers acc. to ÖBB TK135R559, palette out of 50 coils = 5000m/palette Material: PP | 0.1 kg | 41183 | ||
| lifting grab | ||||
 | lifting grab channels and cable troughs, max. load 250 kg | 18 kg | 80018 | |
 | lifting grab channels and cable troughs, max. load 600 kg max. load: 600 kg opening width: 50 - 600 mm, grabs from the outside; Pay attention to the attached safety instructions! | 29 kg | 80019 | |
Download category
Any
questions?